Fluid Handling and Processing - Nasni Consultants

Enhancing Wastewater Ammonia Treatment With Economical CA-6 Colorimetric Analyzer

Post author:Diran Taofeek Folami
Post published:August 27, 2020
Post category:Fluid Handling and Processing
Post last modified:August 27, 2020

Engineers at municipal wastewater treatment plants tasked with the removal of ammonia will find the versatile CA-6 Colorimetric Ammonia Analyzer from Electro-Chemical Devices (ECD) helps them protect water quality with confidence prior to releasing effluent into re-use systems, groundwater recharge basins and surface water systems.

The post Enhancing Wastewater Ammonia Treatment With Economical CA-6 Colorimetric Analyzer appeared first on Fluid Handling Pro.

Source of Article

Cost-Efficiency with Compressed Air Leak Detection

Post author:Diran Taofeek Folami
Post published:August 27, 2020
Post category:Fluid Handling and Processing
Post last modified:August 27, 2020

Compressed air leaks are expensive, as all manufacturing companies that record their compressed air costs know. The continuous detection and removal of leaks is often a challenge even under normal operating conditions.

The post Cost-Efficiency with Compressed Air Leak Detection appeared first on Fluid Handling Pro.

Source of Article

Maintenance with Simple Hand Movements: Easy Maintenance Solutions

Post author:Diran Taofeek Folami
Post published:August 27, 2020
Post category:Fluid Handling and Processing
Post last modified:August 27, 2020

Seepex is systematically expanding its range of user-friendly maintenance solutions, which achieve sustainable reductions in operating costs and lengthen product life.

The post Maintenance with Simple Hand Movements: Easy Maintenance Solutions appeared first on Fluid Handling Pro.

Source of Article

ST75 Thermal Mass Flow Meter Provides Precise Gas Line Control for Industrial Ovens & Furnaces

Post author:Diran Taofeek Folami
Post published:August 27, 2020
Post category:Fluid Handling and Processing
Post last modified:August 27, 2020

The advanced, compact ST75 Air/Gas Flow Meter from Fluid Components International (FCI), which measures fuel gas, process gas, inert gas, waste gases and air in small line sizes, is ideal for optimizing natural gas flow control for industrial ovens, heat chambers and furnaces to reduce process and plant fuel costs.

The post ST75 Thermal Mass Flow Meter Provides Precise Gas Line Control for Industrial Ovens & Furnaces appeared first on Fluid Handling Pro.

Source of Article

NETZSCH is Expanding its Product Range by Several Sizes of the N.Mac® Twin Shaft Grinder for Flow Rates up to 400 m³/h

Post author:Diran Taofeek Folami
Post published:August 26, 2020
Post category:Fluid Handling and Processing
Post last modified:August 26, 2020

The N.Mac® twin shaft grinder from NETZSCH is available with a channel or an inline housing. The versatile grinder is now available in further sizes for flow rates up to 400 m³/h.

The post NETZSCH is Expanding its Product Range by Several Sizes of the N.Mac® Twin Shaft Grinder for Flow Rates up to 400 m³/h appeared first on Fluid Handling Pro.

Source of Article

Read more about the article Replacement of Damaged Invasive Measuring Technology at Highly Demanding Measuring Points in Water Grid Without Affecting Potable Water Hygiene

Replacement of Damaged Invasive Measuring Technology at Highly Demanding Measuring Points in Water Grid Without Affecting Potable Water Hygiene

Post author:Diran Taofeek Folami
Post published:August 26, 2020
Post category:Fluid Handling and Processing
Post last modified:August 26, 2020

Katronic has supplied a large German regional water supplier with a KATflow 150 clamp-on, non-invasive ultrasonic flowmeter, hygienically replacing a faulty vortex meter in a high-pressure flow monitoring position.

The post Replacement of Damaged Invasive Measuring Technology at Highly Demanding Measuring Points in Water Grid Without Affecting Potable Water Hygiene appeared first on Fluid Handling Pro.

Source of Article

The Value of an Integrated Cryogenic Metering Solution

Post author:Diran Taofeek Folami
Post published:August 26, 2020
Post category:Fluid Handling and Processing
Post last modified:August 26, 2020

The cryogenics industry has changed drastically in the past ten years. Although the general population may know very little about the business, those of us in the industry realize its significance as it impacts medical delivery systems, food processing, space exploration, construction, transportation, electronics, and numerous other markets.

The post The Value of an Integrated Cryogenic Metering Solution appeared first on Fluid Handling Pro.

Source of Article

Venturi Meters Reach Accurate Readings at Low Flow Rates

Post author:Diran Taofeek Folami
Post published:August 26, 2020
Post category:Fluid Handling and Processing
Post last modified:August 26, 2020

PFS was contacted by a large municipality to discuss the replacement of four (4) existing 72” venturi meters.

The post Venturi Meters Reach Accurate Readings at Low Flow Rates appeared first on Fluid Handling Pro.

Source of Article

Precise Flow Measurement for the Food & Beverage Sector

Post author:Diran Taofeek Folami
Post published:August 26, 2020
Post category:Fluid Handling and Processing
Post last modified:August 26, 2020

Titan Enterprises is a leading supplier of precision flow measurement devices for the food and beverage sector. Flow measurement is widely recognised as a critical tool for food and beverage manufacturers looking to control operations including filling of vessels, measurement of liquid ingredients and controlling cleaning processes.

The post Precise Flow Measurement for the Food & Beverage Sector appeared first on Fluid Handling Pro.

Source of Article

High Precision Flowmeters for Test Benches

Post author:Diran Taofeek Folami
Post published:August 26, 2020
Post category:Fluid Handling and Processing
Post last modified:August 26, 2020

We had already been developing and producing pumps for over 30 years when necessity made us inventive in the early 80s.

The post High Precision Flowmeters for Test Benches appeared first on Fluid Handling Pro.

Source of Article