Chamber Success as Borger’s Pumps Take Screws Out and Send Energy Costs Down

Burdened with cumbersome maintenance, expensive spare parts and very high energy costs, a wastewater treatment plant has replaced its multi-phase eccentric screw pumps with new Rotary Lobe pumps, made by Börger.

The post Chamber Success as Borger’s Pumps Take Screws Out and Send Energy Costs Down appeared first on Fluid Handling Pro.

Source of Article

Continue ReadingChamber Success as Borger’s Pumps Take Screws Out and Send Energy Costs Down

Triple Gate Valve Triumph for Oliver Valvetek

Oliver Valvetek identifies new and emerging opportunities to supply higher pressure small-bore subsea valves, and recognizes the technical barriers that hinder most other valve suppliers.

The post Triple Gate Valve Triumph for Oliver Valvetek appeared first on Fluid Handling Pro.

Source of Article

Continue ReadingTriple Gate Valve Triumph for Oliver Valvetek

Reagent-less FC80 & FC80X Free Chlorine Analyzers Minimize Maintenance & Cut Cost of Ownership

Water process and plant engineers bogged down by the monitoring and frequent replacement of sensor reagents will find that they can now save time and money with the FC80 Free Chlorine Analyzer and FCX80 Free-Chlorine Analyzer from Electro-Chemical Devices (ECD), which are suitable for either general-purpose use or for use in hazardous areas where potential combustible gas leaks are a concern.

The post Reagent-less FC80 & FC80X Free Chlorine Analyzers Minimize Maintenance & Cut Cost of Ownership appeared first on Fluid Handling Pro.

Source of Article

Continue ReadingReagent-less FC80 & FC80X Free Chlorine Analyzers Minimize Maintenance & Cut Cost of Ownership

Strength in Numbers: Matching Lamb Wave Sensors To The Resonant Frequency of a Pipe Wall

Clamp-on ultrasonic technology offers several major advantages over other methods of flow measurement when it comes to accounting for what, and how much, is flowing through a pipe. These benefits are derived primarily from one very important feature of clamp-on ultrasonic flow meters: their external sensors.

The post Strength in Numbers: Matching Lamb Wave Sensors To The Resonant Frequency of a Pipe Wall appeared first on Fluid Handling Pro.

Source of Article

Continue ReadingStrength in Numbers: Matching Lamb Wave Sensors To The Resonant Frequency of a Pipe Wall

EXAIR’s New Catalog 35 Features New Products, Standards and Information to Solve Manufacturing Problems

The demands of the average manufacturing process are constantly evolving, and it becomes increasingly important to understand how to best provide safety and efficiency to unique environments.

The post EXAIR’s New Catalog 35 Features New Products, Standards and Information to Solve Manufacturing Problems appeared first on Fluid Handling Pro.

Source of Article

Continue ReadingEXAIR’s New Catalog 35 Features New Products, Standards and Information to Solve Manufacturing Problems

LB 476 Level+ More Than a Level Measurement System

The LB 476 Level+ system adds that little extra to radiometric level measurements, which makes it the perfect system for the most challenging processes.

The post LB 476 Level+ More Than a Level Measurement System appeared first on Fluid Handling Pro.

Source of Article

Continue ReadingLB 476 Level+ More Than a Level Measurement System

Materials, Product Life, Performance – What Essential Parameters Drive Your Flow Meter Choice?

Titan Enterprises, a leading UK design and manufacturer of liquid flow measurement sensors, presents a comparison of their flowmeter types that will influence the suitability for your process application.

The post Materials, Product Life, Performance – What Essential Parameters Drive Your Flow Meter Choice? appeared first on Fluid Handling Pro.

Source of Article

Continue ReadingMaterials, Product Life, Performance – What Essential Parameters Drive Your Flow Meter Choice?

Endress+Hauser Strengthens Commitment in India

Endress+Hauser has opened a new production building on its campus in Aurangabad, India. This milestone not only underlines the company’s commitment to the region but also reaffirms its continued investment in world-class production and working environments.

The post Endress+Hauser Strengthens Commitment in India appeared first on Fluid Handling Pro.

Source of Article

Continue ReadingEndress+Hauser Strengthens Commitment in India

The Ball Valve Transformation – GF Piping Systems Expands its Line of Pro Ball Valves

The Ball Valve 523 Pro and Ball Valve 546 Linear Pro have joined the Swiss flow solution provider’s growing product family of state-of-the-art and interoperable solutions for Process Automation. The line-up features corrosion-free materials, a simple and reliable operation, as well as various actuation options.

The post The Ball Valve Transformation – GF Piping Systems Expands its Line of Pro Ball Valves appeared first on Fluid Handling Pro.

Source of Article

Continue ReadingThe Ball Valve Transformation – GF Piping Systems Expands its Line of Pro Ball Valves

Connecting with our Digital Future

The IQ3 range is renowned for being one of the most robust and intelligent actuators in the industry, and Rotork is excited to introduce the new IQ3 Pro with full mobile App integration. This evolution enables the continual development of new features that drive digitisation and future-proofing of electric actuation.

The post Connecting with our Digital Future appeared first on Fluid Handling Pro.

Source of Article

Continue ReadingConnecting with our Digital Future