Innovations - Nasni Consultants

ABB’s Flowmeter: Optimizing Water Measurement for Fire Suppression Systems

Post author:Diran Taofeek Folami
Post published:September 28, 2023
Post category:Fluid Handling and Processing
Post last modified:September 28, 2023

Insurance providers highly regulate the equipment used for fire service to protect the investment and ensure the workers’ safety.

A constant supply of water must be available for sprinkler systems to be continuously ready. To achieve this, the water supply must be maintained at a suitable pressure.

The post ABB’s Flowmeter: Optimizing Water Measurement for Fire Suppression Systems appeared first on Fluid Handling Pro.

Source of Article

How to Meet Small Pipe Challenges in Manufacturing Fluid Flow

Post author:Diran Taofeek Folami
Post published:September 27, 2023
Post category:Fluid Handling and Processing
Post last modified:September 27, 2023

The need for precise fluid measurement and control is ubiquitous in manufacturing processes — in the research lab, through the conversion of raw materials to finished goods, and during packaging. Continuously measuring, monitoring, and analyzing fluid flow with suitable measurement technologies improves process reliability, performance, and uptime, as well as environmental sustainability and regulatory and standards compliance. This FAQ addresses growing challenges and modern solutions for fluid flow control.

The post How to Meet Small Pipe Challenges in Manufacturing Fluid Flow appeared first on Fluid Handling Pro.

Source of Article

ABB Launches Flowmeters With Faster And More Reliable Data Transmission for Process Industries

Post author:Diran Taofeek Folami
Post published:September 27, 2023
Post category:Fluid Handling and Processing
Post last modified:September 27, 2023

ABB has launched CoriolisMaster and ProcessMaster flowmeters that can be powered over the same ethernet cable used for data transmission, eliminating the need for separate cabling. The new feature reduces installation time and cost, and increases the speed and reliability of data transmission.

The post ABB Launches Flowmeters With Faster And More Reliable Data Transmission for Process Industries appeared first on Fluid Handling Pro.

Source of Article

Teledyne Gas and Flame Detection to Promote Decarbonisation Initiatives at Adipec 2023

Post author:Diran Taofeek Folami
Post published:September 26, 2023
Post category:Fluid Handling and Processing
Post last modified:September 26, 2023

Teledyne Gas and Flame Detection will not only use ADIPEC 2023 to demonstrate how its latest innovations successfully protect both people and capital assets in the oil and gas sector, but also to illustrate the company’s proactive decarbonisation drive in support of wider industry sustainability efforts.

The post Teledyne Gas and Flame Detection to Promote Decarbonisation Initiatives at Adipec 2023 appeared first on Fluid Handling Pro.

Source of Article

Capacitance Point Level Detection in Liquid Naphthalene

Post author:Diran Taofeek Folami
Post published:September 21, 2023
Post category:Fluid Handling and Processing
Post last modified:September 21, 2023

Capacitance point level detection in liquid naphthalene A point level measurement to avoid overfilling or emptying is required in almost all process containers today. In the chemical industry in particular, sensors are usually exposed to aggressive, adhesive or caustic materials. The measurement technology has to deal with high temperatures, varying DK values and viscosity quickly and reliably. In order to meet these conditions in practice with a clever solution, system planners are increasingly using the capacitive rod probes. The use of the capacitive RFnivo® in liquid naphthalene in a plant in India is explained in more detail below. Convinced of the measurement technology from the Allgäu for years, a UWT solution was out of the question for the project planner.

The post Capacitance Point Level Detection in Liquid Naphthalene appeared first on Fluid Handling Pro.

Source of Article

Brooks Instrument Introduces New Coriolis Mass Flow Controllers for Low-Flow, High-Accuracy Applications

Post author:Diran Taofeek Folami
Post published:September 20, 2023
Post category:Fluid Handling and Processing
Post last modified:September 20, 2023

he new Brooks Instrument Quantim® QMC series of Coriolis mass flow controllers offers faster response time, enhanced diagnostics, expanded I/O options and improved zero stability.

The post Brooks Instrument Introduces New Coriolis Mass Flow Controllers for Low-Flow, High-Accuracy Applications appeared first on Fluid Handling Pro.

Source of Article

Titan Enterprises’ Atrato® Flowmeters now with ASCII Flow Streaming Capability

Post author:Diran Taofeek Folami
Post published:September 14, 2023
Post category:Fluid Handling and Processing
Post last modified:September 14, 2023

As a specialist liquid flow meter manufacturer, Titan’s patented ultrasonic technology has led to an expanding line of ultrasonic flowmeters and patents ranging from signal processing methodology to novel mechanical design.

The post Titan Enterprises’ Atrato® Flowmeters now with ASCII Flow Streaming Capability appeared first on Fluid Handling Pro.

Source of Article

Flow-How Made by Anderson-Negele: Setting Industry Standards

Post author:Diran Taofeek Folami
Post published:September 14, 2023
Post category:Fluid Handling and Processing
Post last modified:September 14, 2023

Hygienic sensor specialist Anderson-Negele has completed the integration of GEA Diessel's electromagnetic flowmeter division.

The post Flow-How Made by Anderson-Negele: Setting Industry Standards appeared first on Fluid Handling Pro.

Source of Article

59 WANGEN Pumps for Underground Wastewater Treatment Plant

Post author:Diran Taofeek Folami
Post published:September 12, 2023
Post category:Fluid Handling and Processing
Post last modified:September 12, 2023

WANGEN pumps supplied by FlowExperts Oy are part of a wastewater treatment plant in Finland.

The post 59 WANGEN Pumps for Underground Wastewater Treatment Plant appeared first on Fluid Handling Pro.

Source of Article

Detecting Natural Gas and Hydrogen in One Instrument

Post author:Diran Taofeek Folami
Post published:September 12, 2023
Post category:Fluid Handling and Processing
Post last modified:September 12, 2023

Teledyne Gas & Flame Detection is releasing an enhanced version of the popular Gasurveyor 700 (GS700), known as the GS700-Hydrogen. This upgraded model incorporates the capability to detect hydrogen (H2), in addition to its existing ability to detect natural gas (NG). This integration of natural gas and H2 detection within a single instrument enhances versatility and performance across various gas utility applications. Notably, extensive testing and collaboration with major UK gas utility companies played a crucial role in the development of this new instrument.

The post Detecting Natural Gas and Hydrogen in One Instrument appeared first on Fluid Handling Pro.

Source of Article