Industry consultant has found that one of the best ways to improve client performance in this critical market is by recommending the use of Almatec® FUTUR and E-Series AODD Pumps
The post eMAXX-imizing Semiconductor Production Reliability appeared first on Fluid Handling Pro.
Source of Article
"Triplex pumps are the first choice for applications that rely on a particularly low-pulsation flow rate," says Thomas Bökenbrink, Lead Product Manager Pumps at LEWA. "Due to their design, these pumps have a residual pulsation of only approx. 20 percent, since the flow rates of the individual plungers overlap." In principle, 3-headed pumps can be built in a modular or monoblock design. The combination of several individual units in a modular design requires more space as well as additional couplings and gaskets, which comes at the expense of simplicity and robustness. So far, the lower costs of the modular solution have compensated for the disadvantages of this design. For this reason, LEWA generally met requests for particularly low-pulsation pumps with a three-pump combination of modular LEWA ecoflow drive units. With the new LEWA triplex G3E, however, the pump manufacturer from Leonberg, Germany, is now ushering in a new era for process technology applications with medium hydraulic outputs.
The post Compact Triplex Diaphragm Pump in Robust Mono-Block Design for Smooth Metering and Unique Power Output appeared first on Fluid Handling Pro.
Source of Article
WANNER has designed and developed a metering pump range that integrates Hydra-Cell Pro seal-less pump technologies for the highest levels of volumetric and energy efficiencies across the full turndown – 100% to 1% of rated flow – for accurate metering performance.
The post A Higher Standard of Metering Performance and Energy Efficiency appeared first on Fluid Handling Pro.
Source of Article
In the food industry, cooling circuits are installed covering the process steps from food production and processing to food conveying and temperature controlled storage. As the handling of food requires increased safety control, hermetic systems such as canned motor pumps are often used in large plants to circulate the refrigerant or food, such as in the beverage industry.
The post Canned Motor Pumps for the Food Industry appeared first on Fluid Handling Pro.
Source of Article
DERAGGER® is an advanced technology designed to detect and address initial ragging that can prevent pump blockages and enhance system efficiency. By catching rag balls early and preventing their buildup, DERAGGER® helps reduce energy consumption and operational costs.
The post Overcome Pump Ragging to Boost Efficiency appeared first on Fluid Handling Pro.
Source of Article
The maintenance is over – How to reduce operating costs with servicing-free pumping stations
The post Servicing-Free Raw Sewage Pumping Stations appeared first on Fluid Handling Pro.
Source of Article
In 2021, around 11 billion tons of cargo were transported by sea worldwide. This accounts for almost 90 percent of global trade and means that the shipping industry, which has mainly been powered by heavy fuel oil until now, is responsible for around three percent of global CO2 emissions. There are other pollutants as well, like sulfur and nitrogen oxides. When it comes to clean alternative fuels, liquid ammonia (NH3) is currently coming to the fore, but it is toxic to both humans and animals and extremely harmful to the environment. This is why the pumping technology used must be compact and low-pulsation, and also hermetically tight. Moreover it must ensure maximum operational reliability. To cover these requirements in different output ranges, LEWA is presenting its triplex diaphragm pumps in a new size at this year's SMM. With an hydraulic power of 10 kW, the LEWA triplex G3E is the smallest of its kind to date and offers a low-pulsation alternative to single-head pumps in the medium power range.
The post Shaping the Future of Marine Propulsion: Clean Alternative Fuels Require Fail-Safe, Compact and Hermetically Tight Pump Systems appeared first on Fluid Handling Pro.
Source of Article
Being able to provide perfect water quality levels in swimming pools that are very busy can be a challenge. However, full compliance with all prescribed setpoints, such as combined chlorine or chlorate, must be ensured at all times. The AQWA Pool and Sauna Park in Walldorf therefore uses measuring and control technology from ProMinent.
The post Swimming Pool Water Treatment With ProMinent: Precise, Digital and Simple appeared first on Fluid Handling Pro.
Source of Article
The Tres Valles Sugar Mill was established by the Mexican Federal Government in 1978 and has been under the operation of the PIASA Group, Promotora Industrial Azucarera, SA de CV since 1988. With a grinding capacity of around 13,000 metric tonnes (14,330 short tons) of cane per day, the plant yields over 1,500 metric tonnes (1,654 short tons) of sugar within a 24-hour period. Its supply area spans approximately 40,000 hectares (98,842 acres), primarily rainfed, and is cultivated by over 3,500 sugarcane producers.
The post Sugar Mill River Water Intake Pump appeared first on Fluid Handling Pro.
Source of Article
Many winter sports facilities, such as luge tracks, figure skating arenas or even indoor ski and snowboard centres require operating temperatures below 0 °C. CO2 / NH3 cascade systems are often used for this purpose to ensure safe and environmentally friendly operation. These efficient and safe systems are also used at major sporting events such as world championships or the Olympic Games.
The post Canned Motor Pumps for Sport Facilities appeared first on Fluid Handling Pro.
Source of Article
Copyright © 2025 Nasni Consultants Ltd. All Rights Reserved