Fluid Handling and Processing - Nasni Consultants

Increasing Interest in ZLD Driven by Costs and Environment

Post author:Diran Taofeek Folami
Post published:November 28, 2023
Post category:Fluid Handling and Processing
Post last modified:November 28, 2023

In 2021 the global market for zero liquid discharge (ZLD) technology was estimated at $1 billion and is forecast to grow at almost 12% over the next ten years. The rise is being driven in particular by an increase in adoption of the technology by the food and drink and textile industries as a growing world population puts greater pressure on fresh water supplies.

The post Increasing Interest in ZLD Driven by Costs and Environment appeared first on Fluid Handling Pro.

Source of Article

UWT Solution in Seawater

Post author:Diran Taofeek Folami
Post published:November 28, 2023
Post category:Fluid Handling and Processing
Post last modified:November 28, 2023

Content level measurement detection in seawater tanks.

The post UWT Solution in Seawater appeared first on Fluid Handling Pro.

Source of Article

Pre-Insulated Plastic Piping Systems Improve the Sustainability of HVAC Applications

Post author:Diran Taofeek Folami
Post published:November 24, 2023
Post category:Fluid Handling and Processing
Post last modified:November 24, 2023

GF Piping Systems and Swiss Climate AG have conducted a life-cycle analysis of the factory pre-insulated COOL-FIT 2.0 system. The results, which have now been published in a whitepaper, show that thermoplastic solutions in HVAC applications have a lower carbon footprint than metal while also increasing longevity and efficiency.

The post Pre-Insulated Plastic Piping Systems Improve the Sustainability of HVAC Applications appeared first on Fluid Handling Pro.

Source of Article

Eye Wash Station and Shower Flow Assurance In Hazardous Areas With SIL-2 Rated FLT93 Switches

Post author:Diran Taofeek Folami
Post published:November 24, 2023
Post category:Fluid Handling and Processing
Post last modified:November 24, 2023

Plant operations and safety staff in the petrochemical, refineries, chemical, and other industries required to meet U.S. Occupational Health & Safety (OSHA) regulations for emergency eye wash stations and showers in hazardous areas will find the SIL-2 rated FLT93 Flow Switch from Fluid Components International (FCI) helps them to ensure water flow and alert staff to station-in-use events.

The post Eye Wash Station and Shower Flow Assurance In Hazardous Areas With SIL-2 Rated FLT93 Switches appeared first on Fluid Handling Pro.

Source of Article

The Perfect Instrumentation Equipment For Craft Brewers

Post author:Diran Taofeek Folami
Post published:November 24, 2023
Post category:Fluid Handling and Processing
Post last modified:November 24, 2023

Rainer Kruppa is a passionate craft brewer who has optimized his own organic-certified Calenberger brewery, ensuring optimal efficiency for up to four brews of 1,200 liters each per day, all crafted according to his personal recipes. In addition to his own beer varieties, Kruppa also produces unique brews for “gipsy brewers” who lack their own brewing facilities. To achieve this remarkable level of production flexibility, Kruppa combines his expertise as a brewmaster with support from Anderson-Negele’s instrumentation solutions.

The post The Perfect Instrumentation Equipment For Craft Brewers appeared first on Fluid Handling Pro.

Source of Article

New Hygienic Angle Seat Valves For Food and Beverage Production

Post author:Diran Taofeek Folami
Post published:November 24, 2023
Post category:Fluid Handling and Processing
Post last modified:November 24, 2023

Schubert & Salzer is extending its range of sterile and aseptic valves by two new types of hygienic angle seat valves.

The post New Hygienic Angle Seat Valves For Food and Beverage Production appeared first on Fluid Handling Pro.

Source of Article

Silverson High Shear Laboratory Mixing Equipment

Post author:Diran Taofeek Folami
Post published:November 23, 2023
Post category:Fluid Handling and Processing
Post last modified:November 23, 2023

Laboratory scale mixing equipment can be an important factor in the success or failure of products while in the development or formulation stage, so choosing the right mixer for the application is essential.

The post Silverson High Shear Laboratory Mixing Equipment appeared first on Fluid Handling Pro.

Source of Article

Evergreen Landia Mixers All Part of Gardner’s High Standards

Post author:Diran Taofeek Folami
Post published:November 23, 2023
Post category:Fluid Handling and Processing
Post last modified:November 23, 2023

Some might consider the relentless maintenance regime at a treatment plant in Kansas to be almost too pro-active. But the longevity and reliability of this site’s equipment speaks volumes for the way this wastewater facility is run; not to mention the multiple awards it has won.

The post Evergreen Landia Mixers All Part of Gardner’s High Standards appeared first on Fluid Handling Pro.

Source of Article

Senior Living Community’s Water Supply Protected by an AVT EZ Valve

Post author:Diran Taofeek Folami
Post published:November 23, 2023
Post category:Fluid Handling and Processing
Post last modified:November 23, 2023

When engineers at the Santa Margarita Water District (SMWD) identified a need for a new control point near a senior living community they reached out to AVT distributor Western Water Works.

The post Senior Living Community’s Water Supply Protected by an AVT EZ Valve appeared first on Fluid Handling Pro.

Source of Article

Navigating Biopharmaceutical Manufacturing for Optimum Safety and Quality

Post author:Diran Taofeek Folami
Post published:November 23, 2023
Post category:Fluid Handling and Processing
Post last modified:November 23, 2023

In this article, Vincent Guido, Sales Director at Terracon, a ChargePoint Technology company, explores the complexities of liquid and powder handling throughout biopharmaceutical manufacture to ensure safety and quality standards are met.

The post Navigating Biopharmaceutical Manufacturing for Optimum Safety and Quality appeared first on Fluid Handling Pro.

Source of Article