Identified as the loss of volatile organic compounds (VOCs), FE commonly occur in the plant environment through equipment leaks, flaring, evaporation, and spills. As 1% of the total of installed valves may be responsible for most of a plant’s emissions, effective component stem packing designs are vital to addressing this growing concern.
This is the view of Ronald Simon, Principal Engineer for Oil & Gas at CCI Valve Technology GmbH in Austria (IMI CCI), who is emphasising the importance of effective FE valve stem packing designs in reducing potential plant greenhouse gas (GHG) emissions, including methane and CO2. Specifically, he is urging facility stakeholders to review existing on-site packing solutions to ensure they meet the most up to date industry standards for FE and control valve qualification.
“Control valves are among the most prevalent components that contribute to fugitive emissions in an industrial setting, with rising stem control valves proving especially susceptible to leakage,” explains Ronald. “Considering that fugitive emissions can account for up to 70% of total plant and refinery emissions, action must be taken to minimise the levels of greenhouse gases (GHGs) currently emitted. Reviewing existing equipment, as well as specifying efficient and effective packing solutions that meet the highest possible standards, should therefore be a priority for plant equipment specifiers.”
To resolve this issue, IMI CCI has developed the EEEasy-Seal™ emission packing solution, which provides up to ISO Class AM FE leakage protection and is third-party certified to ISO 15848-1, the industrial standard for FE Control Valve testing. In contrast to conventional packing set designs with external springs, the EEEasy-Seal™ is live loaded via an internal spring utilising the internal hydraulic pressure to optimally energise the seal, resulting in a closed, low-maintenance design.
“Maintenance and Plant Integrity teams have multiple demands on their time, including keeping all plant equipment operational and safe,” Ronald concludes.
“With this in mind, traditional low-emission packing solutions may pose a problem, as they could wear faster due to higher friction and require frequent maintenance on site. They require more upkeep and monitoring from increasingly time poor maintenance teams and give further cause for concern on unmanned platforms or vibration sensitive systems.
“By developing technologies that use internal springs, this issue can be negated while also reducing the seal contact area, further reducing friction. As the IMI CCI EEEasy-Seal™ can be installed in a compact, fireproof packing box without external live loading or requiring continuous maintenance, it is well placed to tackle FE leakage concerns efficiently and effectively.”
 ESA European sealing assoc. Pub. No. 014/05
Source of Article