Dr Thomas Buer will become the new managing director of Endress+Hauser Liquid Analysis on 1 October 2024. He succeeds Dr Manfred Jagiella, who is retiring at the end of September after 17 years at the helm of the competence center for liquid analysis.
The post Change at Endress+Hauser Liquid Analysis appeared first on Fluid Handling Pro.
Source of Article
Process and plant engineers concerned about meeting U.S. Environmental Protection Agency (EPA) pollution requirements for accidental water leaks or treated wastewater effluent and storm water run-off will find the Oil-in-Water OIW80 Analyzer from Electro-Chemical Devices (ECD) helps detect those leaks quickly and ensures wastewater meets federal, state and local regulations to avoid shutdowns, fines and clean-ups.
The post Monitoring Oily Water Leaks and Effluent From Industrial & Municipal Systems With Fluorescence Sensing Analyzer appeared first on Fluid Handling Pro.
Source of Article
Using the BlueEdge™ suite of fully scalable solutions by Badger Meter, a Serbian Wastewater treatment plant has created a bespoke system, integrating both technology and software, for the monitoring of wastewater quality and quantity. Installed at a wastewater treatment plant in Central Serbia, the system monitors the influent at the inlet to the treatment plant, providing an integrated leading-edge solution for the continuous online monitoring of flow and wastewater quality. This has led to improved control of the treatment process and increased plant efficiency, ensuring that effluent levels comply with regulatory standards before discharge into the Morava River.
The post Badger Meter Delivers BlueEdge™ Solution for Wastewater Monitoring appeared first on Fluid Handling Pro.
Source of Article
The new XMTCpro is a compact, rugged, online thermal conductivity transmitter that measures the concentration of binary gas mixtures including hydrogen, carbon dioxide, methane, helium and many others.
The post Panametrics Launches XMTCpro Thermal Conductivity Binary Gas Analyzer appeared first on Fluid Handling Pro.
Source of Article
Municipal water engineers tasked with preventing pipe corrosion by carefully balancing system pH/Alkalinity/DIC levels will find that the advanced CA900 Alkalinity Analyzer from Electro-Chemical Devices (ECD) automates the routine measurement of low- to high-range alkalinity with a cost-effective, precision approach.
Failing to detect high levels of alkalinity accurately in municipal water presents several problems such as poor water quality, over-disinfection and maintenance issues. ECD’s CA900 Alkalinity Analyzer detects alkalinity from low to high ranges, which helps municipal water engineers, technicians and staff to avoid costly state and regulatory violations, fines and civil judgments.
The post Measuring High-Range Alkalinity With CA900 Analyzer Protects Water Quality & Valuable System Infrastructure appeared first on Fluid Handling Pro.
Source of Article
The climate crisis is driving demand for the electrification of transportation and energy infrastructure, which in turn is accelerating the need for more powerful and safer rechargeable batteries, including li-ion, sodium-ion, and solid-state. However, one of the key issues affecting battery quality is accurate humidity monitoring and dry control during manufacture, and in the following article, Antti Viitanen from the measurement technology company Vaisala, explains why.
The post Rechargeable Battery Manufacturers Rely on Accurate Humidity Measurements appeared first on Fluid Handling Pro.
Source of Article
Busy municipal water plant engineers and techs will appreciate how the precision FC80 Series Chlorine Analyzer from Electro-Chemical Devices (ECD) simplifies their work day by providing dependable free chlorine measurement without being bogged down by monitoring for the time-consuming frequent replacement of sensor reagents.
The post Easy-Button Free Chlorine Analyzer Delivers Performance With Less Maintenance and Lower Cost-of-Ownership appeared first on Fluid Handling Pro.
Source of Article
GEA introduces NiSoMate, a sensor-based technology for product control during the homogenization process. Liquids are continuously analyzed inline for their consistency and quality in real time. This enables direct adjustment of system performance, such as homogenization pressure, resulting in more efficient use of energy in the production process. By implementing this new sensor technology, traditional sampling methods are bypassed, significantly saving time. The patented GEA NiSoMate will be showcased for the first time at this year's Anuga FoodTec, which takes place from March 19 to 22, 2024, in Cologne, Germany.
The post Real-time monitoring with GEA NiSoMate: Continuous inline control of the consistency and quality of liquids during the homogenization process appeared first on Fluid Handling Pro.
Source of Article
Analytik Jena will be presenting three new device series for laboratory analysis at this year's analytica in Munich. The innovations include the new multi N/C x300 product series for TOC/TNb analysis in the environmental and pharmaceutical sectors, the pioneering qTOWER iris real-time PCR thermal cycler and an innovative system for automated sample preparation in ICP-MS analysis.
The post Analytik Jena to Present Three new Product Series at Analytica 2024 appeared first on Fluid Handling Pro.
Source of Article
Water management is an increasingly important and challenging issue, particularly in light of concerns such as water scarcity. Greater value is thus being placed on disinfection processes. To protect against bacteria, viruses and other harmful organisms, drinking water requires disinfection and hygiene measures. This also applies to the environment in order that lakes and water-based activities can be enjoyed without hesitation. Disinfection processes play a large role in industrial processes as well. In the beverage industry, drinking water flows directly into the products, while surface waters are frequently used as a coolant in other segments such as energy generation. In this case the disinfection process ensures that no biofilms or bacterial lawns form in the coolant pipes or tanks, which can reduce the cooling capacity.
The post Consistent Beverage Quality Through Precise Disinfection Monitoring appeared first on Fluid Handling Pro.
Source of Article
Copyright © 2025 Nasni Consultants Ltd. All Rights Reserved