The latest generation of dual sensors from Pepperl+Fuchs monitors the valve position of valve actuators in a reliable and contactless way.
The post Valve Position Monitoring – Open Solutions for Easy Mounting in Hazardous and Non-Hazardous Locations appeared first on Fluid Handling Pro.
Source of Article
A proprietary process, developed by EGC Enterprises, eliminates the typical surface imperfections that can cause leakage in triple offset butterfly valves.
The post Triple Offset Seat Seal For Butterfly Valves Enables Leak-Free Shut-Off appeared first on Fluid Handling Pro.
Source of Article
The Proximity Mark Series is a line of position indicators with a selection of various output options. The Mark Series has three different model styles, which allow it to be used in almost any application.
The post Product Highlight: Mark Series Position Indicators / Switches / Transmitters appeared first on Fluid Handling Pro.
Source of Article
Maintaining complex systems in the OEM industry can oftentimes be a challenge, particularly when something goes wrong that causes automatic systems to leak.
The post Electric Actuation with the Speed and Reliability of Pneumatics appeared first on Fluid Handling Pro.
Source of Article
Conval offers a full line of U.S.-made, low- and high-pressure Clampseal® bellows seal valves for the world’s most demanding industrial applications.
The post Conval Offers Full Line of Low- and High-Pressure Bellows Seal Valves appeared first on Fluid Handling Pro.
Source of Article
EFSVALVES launches the EFSChem Series Thermoplastic diaphragm pressure relief valves. are designed to protect against pressure increase the pipelines, tanks or any device.
The post EFSVALVES Launches the EFSChem Series Thermoplastic Diaphragm Pressure Relief Valves appeared first on Fluid Handling Pro.
Source of Article
Schroeder Valves, a global expert in pump protection, offers a new unique type of valve for pressures from 140 to 250 bar: the Schroeder Intermediate Pressure Valve (SIP).
The post The SIP Pump Protection Valve is a Unique Type of Valve on the Market appeared first on Fluid Handling Pro.
Source of Article
Process plant engineers conduct a sizing analysis to determine whether a selected control valve has the appropriate flow capacity and operating characteristics to provide the intended process control. Typically, end user control valve sizing is done in accordance with international standards, and the steps outlined by ISA, ANSI, and IEC.
The post Replacing Legacy Control Valves with the Shutter Valve appeared first on Fluid Handling Pro.
Source of Article
A Texas polyethylene plant had valves grouped in a pair of fours with a drive system that could operate one or multiple valves as required. Instead of a traditional hole through the valve, these unique valves had a dosing cup that metered catalyst into the reactor, rotating 360° based on the drive system.
The post A Success Story of ValvTechnologies – TrunTech® Trunnion Dosing Cup appeared first on Fluid Handling Pro.
Source of Article
Asahi/America, Inc., the leader in thermoplastic fluid flow technologies, offers wafer check valves for installation on the discharge side of pumps in applications such as aquariums, water attractions, water treatment and municipalities to prevent back-flow flooding that could seriously damage pump systems.
The post Asahi/America Offers Wafer Check Valves for Back-Flow Prevention appeared first on Fluid Handling Pro.
Source of Article
Copyright © 2024 Nasni Consultants Ltd. All Rights Reserved
